IN STOCK
Dakota Digital Series III instrument systems offer the latest
technologies and features for your custom vehicle. High brightness
vacuum fluorescent displays provide a lifetime of trouble free use while
offering increased accuracy and features!
Digital Gauges |
|
Speedometer |
·0 -255 MPH (optional metric version 0- 255 km/h) |
|
Tachometer |
·0- 17,500 RPM |
|
Oil Pressure |
·0- 99 psi |
|
Water Temperature |
·0- 300ºF (optional metric version 0- 150ºC) |
|
Fuel Level |
·0- 99% |
|
Voltmeter |
·8- 17 VDC |
|
Standard Colors |
·Blue or Teal |
|
Digital Message Centers
|
|
Standard Displays |
·Odometer (One time user settable, Million Mile) |
·Dual (A/B) Trip Meter (0- 9,999.9) |
|
Performance Meters |
·0- 60 MPH Timer (0- 100 kmh) |
·1/4 mile time |
·1/4 mile end speed (trap speed) |
·High speed recall |
·High RPM recall |
|
Gauges |
·Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer. |
|
Built-in Indicators |
|
Indicators |
·Turn Signals (Left/ Right) |
·High Beam |
·Check Engine |
·Parking Brake |
·Cruise Control (On/ On & Engaged when vehicle is equipped) |
·Gear Position (Optional GSS-2000 sensor required) |
·4 x 4 (When vehicle is equipped) |
·Wait to Start (When vehicle is equipped) |
**Not all OEM indicator lamp functions will be replaced. Included Sensors

|
Water Temperature |
1/8" NPT, ground isolated sensor with a 10 ft harness. |
|
Oil Pressure |
1/8" NPT solid state sensor with a 10 ft harness. |
|
Cable Driven Speed Sensor/ Generator |
Replaces GM style speedometer cables with a 10 ft harness. Sensor
requires approximately 5" clearance extending between the cable drive
output and any obstruction. Part # 130011 (sold
separately) allows for relocation of the pulse generator when additional
clearance is required. (Tremec and Ford style adaptors available on
request.) |
|
Bushings |
Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. |
|
Calibration |
|
Pushbutton |
Dakota Digital instruments are programmed and operated by the push
of a button. Simply mount the included pushbuttons supplied with
your gauges in a convenient and easily accessible location. These
buttons are used to calibrate your speedometer, set the cylinder count
and the fuel level gauge. Once properly configured these same buttons
are used to access the wealth of information located in the Digital
Message Centers. |
- If additional indicators are desired within the new instrument
system, consider repurposing any unused indicators to suit your
application.
|
THERE
IS NO NEED TO OPEN A CASE OR LEAVE NEGATIVE FEEDBACK WITH US, ANY PART
YOU RECEIVE FROM US IF IT DOES NOT FIT OR YOU DON'T WANT IT YOU CAN
RETURN IT FOR SURE AND GET YOUR REFUND RIGHT AWAY ,THANK YOU VERY MUCH
FOR UNDERSTANDING
NO
HAY NECESIDAD DE ABRIR UN CASO O DEJAR COMENTARIOS NEGATIVOS CON
NOSOTROS, CUALQUIER PARTE QUE RECIBA DE NOSOTROS SI NO SE ADAPTA O NO LO
QUIERE, PUEDE DEVOLVERLO SEGURO Y OBTENER SU REEMBOLSO INMEDIATAMENTE,
MUCHAS GRACIAS